How long do water heaters last?
Most tank water heaters last 8 to 12 years. Tankless water heaters can last more than 20 years. Regular maintenance helps either type reach the high end of that range.
Should I repair or replace my water heater?
If the tank itself is leaking or your hot water comes out rusty, replace it. If the unit is over 12 years old and needs a repair every year, replacing usually costs less over time. Leaking fittings, a bad valve, sediment or a thermostat problem are usually repairs. Your technician will look at age, condition and repair history before recommending either.
How often should my water heater be serviced?
Once a year. A yearly tune-up flushes out sediment, tests the relief valve and checks the anode rod. Some homeowners flush every six months to keep sediment down. The West Coast Club includes a plumbing visit every year.
Why is my water heater making noise?
Banging or rumbling usually means sediment has built up in the bottom of the tank, and a flush often fixes it. Ticking can point to a pressure change, and screeching to a loose valve. Those need a technician.
Why is my hot water rusty?
Rust usually comes from the inside of the tank as it corrodes, or from a worn anode rod that has stopped protecting it. If the tank itself is rusting, a repair can’t fix it and the water heater needs replacing. We’ll find the source before recommending anything.
Why is water leaking around my water heater?
Leaks from a loose fitting, a worn drain valve or a gasket are usually small repairs. A leak from the tank itself means replacement. Note where the water is coming from without reaching around the unit, and call us.
Is a tankless water heater worth it?
It can be. A tankless unit heats water only when you turn on the tap, so you don’t run out, and it can lower water heating bills by up to 40%. It costs more upfront than a tank, and homes with very high hot water demand may need more than one unit. We’ll help you compare.
What size water heater do I need?
Size it to your household’s peak hot water use, then choose a model slightly larger. Too big and you pay to keep unused water hot; too small and you run out. We work it out with you before recommending a unit.
How long does water heater installation take?
A typical tank replacement takes two to three hours. We drain and remove the old tank, install and connect the new one, let it fill, and test everything before we leave. We’d rather install it right than fast.
What temperature should my water heater be set to?
120°F is usually enough for a home, and it puts less strain on the unit. Many water heaters come set at 140°F.
What is a hybrid heat pump water heater?
A hybrid electric water heater pulls heat from the air around it to warm the water, and switches to standard electric heating when demand peaks. For most homes, a 50 or 80 gallon model fits best. It’s a different system from a heat pump that heats and cools your home.
What should I tell West Coast when I call about my water heater?
Tell us what the hot water is doing: none at all, less than before, slow to heat, or changing temperature. Let us know whether it affects one fixture or the whole home, the type of water heater if you know it, any error code on a tankless display, and any water, rust or new sounds you’ve noticed. You don’t need to remove a cover or diagnose it first.